Quantcast
Channel: Total Phase Blog
Browsing all 704 articles
Browse latest View live

Image may be NSFW.
Clik here to view.

What are the Options to Batch and Store CAN Messages with the Komodo CAN...

Question from the Customer: I am using a Komodo CAN interface. Is there a way to access data from CAN messages from the batch script, not just sending messages? Also, how can I store the received CAN...

View Article


Image may be NSFW.
Clik here to view.

What are the Best Tools for talking to 4 MHz SPI Devices with Shorter Timing...

Question from the Customer: I am attempting to monitor my 4 MHz SPI application with 16-bit transfers with a slave device. I have been using the Aardvark I2C/SPI Host Adapter with the Control Center...

View Article


Image may be NSFW.
Clik here to view.

How do Beagle USB Protocol Analyzers Control the VBUS to the Target Device?

Question from the Customer: I have the Total Phase Beagle USB 480 Protocol Analyzer and am testing some bus-powered devices. Is it possible to use the Beagle Software API to disconnect and connect the...

View Article

Image may be NSFW.
Clik here to view.

What is the Most Streamlined, Flexible, and Low Signal Voltage Solution that...

Question from the Customer: We have the Cheetah SPI Host Adapter, and are starting to work with SPI target devices with various logic voltage levels. However, we would like emulate a slave and work at...

View Article

Image may be NSFW.
Clik here to view.

Which Host Adapter or Serial Platform Supports Both Master and Slave Modes...

Question from the Customer: The Aardvark I2C/SPI Host Adapter has been an excellent all-purpose tool for us; we use it for SPI, as a master and a slave. We are working on new design projects that...

View Article


Image may be NSFW.
Clik here to view.

Which Software Tool Should I Use with the Aardvark I2C/SPI Host Adapter to...

Question from the Customer: I have the Aardvark I2C/SPI Host Adapter and the Flash Center GUI Software which makes it really easy to use - but I do have a question. For my current lab project, I use...

View Article

Image may be NSFW.
Clik here to view.

How Do the Software Tools Work with the Komodo CAN Duo Interface and How Do...

Question from the Customer: I’m new to CAN and am trying to understand a certain command on my truck’s CAN bus.  I’d like to record the data, break it down, and then resend it. Could the Komodo CAN...

View Article

Image may be NSFW.
Clik here to view.

What is the Maximum Speed We Can Achieve Between the Cheetah SPI Host Adapter...

Question from the Customer: We plan to use the Cheetah SPI Host Adapter in an automated testing application. Here are the setup details: The distance between the Cheetah and the target SPI slaves is...

View Article


Image may be NSFW.
Clik here to view.

Which Beagle USB Protocol Analyzer is Best to Monitor Full-Speed USB Traffic...

Question from the Customer: We are looking for a way to look at the full-speed USB traffic that will be exchanged between two embedded devices. These devices go into standby mode when they are not...

View Article


Image may be NSFW.
Clik here to view.

Which Host Adapter and Interface Can I Use to Create a CAN to I2C Translator?

Question from the Customer: I am working on a new design and of part of the requirement is to interface a CAN device to an I2C device. It would be really helpful to emulate that environment - do you...

View Article

Image may be NSFW.
Clik here to view.

See How and Why Beagle USB Protocol Analyzers are the Best Tools for...

Question from the Customer: I just got backed up with a lot of projects and I need to monitor and debug USB data sent by various USB devices. I'll be working with low and full-speed USB 2.0, about...

View Article

Image may be NSFW.
Clik here to view.

How Can I Configure the SPI Timing Parameters for Both SPI Master and SPI...

Question from the Customer: I have been using the Aardvark I2C/SPI Host Adapter as an SPI Master for several projects. It's worked very well for me, but I'm having some challenges with my current...

View Article

Image may be NSFW.
Clik here to view.

How Can I Set Up a Trigger for the Beagle USB 5000 Protocol Analyzer to Start...

Question from the Customer: We have the Beagle 5000 v2 Protocol Analyzer - Standard Edition and we have used it for triggering for USB 3.0 traffic.  For example, we have set  it up with the  trigger to...

View Article


Image may be NSFW.
Clik here to view.

Quickly Power Up and Program Your Dual SPI Flash Devices with the Promira...

What to use: The Promira  Serial Platform, together with the SPI Active Level 1 and SPI Active Level 2 Applications make an excellent tool for programming low voltage Dual SPI Flash devices. You can...

View Article

Image may be NSFW.
Clik here to view.

Which Beagle USB Protocol Analyzer Works Best for Analyzing Smartphone...

Question from the Customer: We need to analyze the USB communication between a smartphone and a prototype board equipped with a custom embedded USB chip. We'll be testing the USB link over various...

View Article


Image may be NSFW.
Clik here to view.

Which Komodo CAN Interface and Which Software Package Best Supports the...

Question from the Customer: I have a project that involves integrating and testing devices on a CAN bus, and I'm looking at your Komodo CAN Solo and Komodo CAN Duo Interfaces. Which one would be best...

View Article

Image may be NSFW.
Clik here to view.

How Many SPI Slave Devices Can I Control with one Promira Serial Platform,...

Question from the Customer: I have three Aardvark SPI/I2C Host Adapters that I have been using to control three SPI slave devices. I'm starting a design where I'll need to control more than thee SPI...

View Article


Image may be NSFW.
Clik here to view.

How Do I Change the Default Bit Rate Setting on the Cheetah SPI Host Adapter...

Question from the Customer: I just started using the Cheetah SPI Host Adapter with the Flash Center Software and it works really well. I have a question about the bit rate speed. I don't always need...

View Article

Image may be NSFW.
Clik here to view.

How Can I Optimize Programming Multiple Images into Different Sectors of an...

Question from the Customer: I saw your knowledge base article that describes how to program multiple images into SPI flash at a different offset, and I used it for the Aardvark I2CSPI Host Adapter:...

View Article

Image may be NSFW.
Clik here to view.

How Do I Share SPI Traces Captured with a Beagle I2C/SPI Protocol Analyzer...

Question from the Customer: I'm working on a project with a colleague who is in a different geographic location. He has collected data capture containing SPI traces from your Beagle I2C/SPI Protocol...

View Article
Browsing all 704 articles
Browse latest View live