Clik here to view.
How Does the Aardvark I2C/SPI Host Adapter Read, Verify and Record Binary Data?
Question from the Customer: We are considering the Aardvark I2C/SPI Host Adapter for an upcoming project. Can the Aardvark adapter be used for the following tasks? Read the device’s contents (in binary...
View ArticleClik here to view.
Which Total Phase Products Support 16-bit SPI Data Transactions with the...
Question from the Customer: I have both the Aardvark I2C/SPI Host Adapter and the Beagle I2C/SPI Protocol Analyzer. In addition to monitoring, I am trying to perform 16-bit read and write operations...
View ArticleClik here to view.
Selecting the Tools to use as an SPI Master to Provide a Clock Signal and...
Question from the Customer: I am trying to use the Beagle I2C/SPI Protocol Analyzer and the Data Center Software to read the I2C bus to capture the data output from an LIS302DL accelerometer. The...
View ArticleClik here to view.
Using the Total Phase Komodo CAN Interfaces for Specialized Test and...
Question from the Customer: We are using the Aardvark I2C/SPI Host Adapter and the Cheetah SPI Host Adapter for our embedded microprocessor development project. They work great and really help reduce...
View ArticleClik here to view.
What Causes the Split Orphaned Packets that the Beagle USB 480 Protocol...
Question from the Customer: I am using the Beagle USB 480 Protocol Analyzer, and have a question about the errors that the Data Center Software captures and reports. Following is a block diagram of my...
View ArticleClik here to view.
How Do I Set Up the Promira Serial Platform to Run an Async Queue or a Sync...
Question from the Customer: I'm trying to use the Promira Serial Platform to write and read to SPI devices: one with an async queue, and another with a sync queue. Can you provide examples to do this?...
View ArticleClik here to view.
Using the Beagle USB 480 Protocol Analyzer and the Data Center Software to...
Question from the Customer: I am using the Beagle USB 480 Protocol Analyzer for USB 2.0 captures. I’m trying to get information and measure timing of every IN-NA“ at a specific point on an existing...
View ArticleClik here to view.
What are the SPI Timing Requirements for the Aardvark I2C/SPI Host Adapter to...
Question from the Customer: I am using the Aardvark I2C/SPI Host Adapter in SPI/GPIO mode as a slave. I set up a MISO message in the Control Center software (I’m using Windows), and the transaction log...
View ArticleClik here to view.
Which Beagle USB Protocol Analyzers Provide an External Trigger to Test a USB...
Question from the Customer: I need to measure timing from an event that produces a USB response in our device. I can trigger a scope off of the edge of the event but I need another trigger when the...
View ArticleClik here to view.
How to Select Which USB Protocol Analyzer to Use to Monitor Output Conditions...
Question from the Customer: We have the Beagle USB 480 Protocol Analyzer [RCA1] and it’s worked really well for us. We’re starting a new project that requires toggling one of the output-signals when...
View ArticleClik here to view.
Use the Beagle I2C/SPI Protocol Analyzers and Total Phase Software API to...
Question from the Customer: I will be using two Beagle I2C/SPI Protocol Analyzers to monitor SPI devices, the data from two A/D converters. I will be using the Beagle Software API and C#. Normally, I...
View ArticleClik here to view.
To Run SPI Tests at a Higher Speed, How Do I Set Up Ethernet Connectivity and...
Question from the Customer: I am using the Promira Serial Platform to run tests and evaluations on the SPI bus of my application. I would like to do some benchmark testing over the Ethernet port. I...
View ArticleClik here to view.
Which SPI Host Adapter Works Best to Interface with an MCU Device for High...
Question from the Customer: I am interfacing a TI MCU (TM4C129x series) with the Aardvark SPI/I2C Host Adapter configured to slave mode. The MCU is sending 10 bytes consecutively out its SPI port in a...
View ArticleClik here to view.
Easily Program SPI Flash Devices Using the Promira Serial Platform with Flash...
The Promira™ Serial Platform with the SPI Active - Level 1 Application is the perfect tool to program SPI memory devices. Together, with the Flash Center Software, makes programming EEPROM and SPI...
View ArticleClik here to view.
Can I use the Aardvark I2C/SPI Host Adapter with a Linux Kernel Driver-based...
Question from the Customer: We need to develop a Linux kernel driver (.ko) for an Intel-based system and want to be able to read/write I2C messages. Is this possible, and if so, what devices and...
View ArticleClik here to view.
Easily Program I2C Memory Devices and Provide Low Voltage Level Power to the...
With the Promira Serial Platform and the I2C Active - Level 1 Application, you can easily program I2C memory devices as well as provide signal voltage and power at the desired low voltage level to the...
View ArticleClik here to view.
Which Host Adapter and Software Can I Use to Program SPI Flash Dual Die Parts?
Question from the Customer: I am designing a system that uses a 1Gbit SPI-Flash (Spansion S70FL01GS). This is a dual-die part. We have used the Aardvark I2C/SPI Host Adapter and Flash Center Software...
View ArticleClik here to view.
How to Use the Promira Serial Platform and Queuing to Read, Write and...
Question from the Customer: We have been using the Aardvark I2C/SPI Host Adapter to evaluate and test I2C peripherals. We write data to the slaves, read it back, and then evaluate the data to...
View ArticleClik here to view.
How Can I Accelerate Sending SPI Data with the High Speed Cheetah SPI Host...
Question from the Customer: I am sending 5 bytes of SPI data using the Cheetah SPI Host Adapter, and Cheetah Python API. It takes about 210 ms to send this data, how do I reduce the programming time?...
View ArticleClik here to view.
How to Choose Which Beagle USB Protocol Analyzer is Best for Your USB 2.0 and...
The product, test and validations have been defined, the budget approved and the project is scheduled. The next question - which hardware and software tools will best support your project to monitor,...
View Article