Clik here to view.
Now You Can Monitor eSPI Messages with the Promira Serial Platform, eSPI...
Total Phase now supports eSPI, a brand-new protocol introduced to replace LPC on motherboard bring up in PCs and servers. With our new eSPI Analysis Application, the Promira Serial Platform can now be...
View ArticleClik here to view.
How Can A Remote Team View and Analyze Captured Data Without a Beagle USB 480...
Question from the Customer: I’m working on a project with teams distributed in several different locations. I would like to share details of a data capture from a Beagle USB 480 Protocol Analyzer, but...
View ArticleClik here to view.
DesignCon 2016 - Another Great Experience
Last week, we finished up 2 busy days at DesignCon 2016 at the Santa Clara Convention Center. DesignCon is a conference primarily for design, verification, and characterization engineers – so it is a...
View ArticleClik here to view.
How do I filter out orphan data from the timeout packages on the USB bus?
Question from the Customer: I am using the latest version of the Total Phase Data Center Software v6.63 and a Beagle USB 480 Power Protocol Analyzer running on Windows 7, 64-bit. There is a lot of...
View ArticleClik here to view.
Can I Use the API Programs that I Wrote for the Aardvark I2C/SPI Host Adapter...
Question from the Customer: I recently upgraded from the Aardvark I2C/SPI Host Adapter to the Promira Serial Platform. To start using the Promira platform as quickly, as possible, I would like to use...
View ArticleClik here to view.
Total Phase is headed to Embedded World 2016!
Total Phase is headed to Embedded World 2016! February 23-25, 2016, Total Phase will participate in the world’s largest trade fair and congress event for embedded system technologies – Embedded World...
View ArticleClik here to view.
Which Total Phase Tools Do You Recommend for Reading and Identifying CAN Bus...
Question from the Customer: We are a small automotive instrument workshop and are looking for software and a hardware interface to both read and identify CAN bus signals. We need to identify the...
View ArticleClik here to view.
See How You Can Easily Program an I2C EEPROM Using the Promira Serial...
Using the Promira Serial Platform with I2C Active Level 1 and/or Active Level 2 Applications, you can easily program I2C EEPROM devices. And you can do so using your choice of software tools to use:...
View ArticleClik here to view.
See How You Can Use the Aardvark I2C/SPI Host Adapter and a DVI DDC Breakout...
Using the Aardvark I2C/SPI Host Adapter with the DVI DDC Breakout Cable, you can quickly and easily read extended display identification data (EDID data) from a DVI monitor EEPROM. This article...
View ArticleClik here to view.
Total Phase at the Embedded World 2016, Nurenburg Germany
Held annually in Nurenburg, Germany, Embedded World 2016 was the largest, most exciting yet. Hundreds of exhibitors displaying their latest embedded technology innovation to thousands of visitors...
View ArticleClik here to view.
Capture & Decode Power Delivery Protocol on Any Platform Using Data Center
Last week we had big news for USB Type-C: we released the first version of Data Center Software supporting capture & decode of the Power Delivery protocol! Along with this, we started shipping our...
View ArticleClik here to view.
How Do I Capture All the USB Data from a Beagle USB 480 Protocol Analyzer,...
Question from the Customer: I’m trying to save all captured data, including the data that is displayed in the lower pane (the ASCII details) to a .csv file. However, my file shows the truncated data as...
View ArticleClik here to view.
You Can Easily Program an SPI EEPROM Using the Promira Serial Platform and...
One of the many benefits of the Promira™ Serial Platform with SPI Active Level 1-3 Applications is that it gives you several options to program SPI devices – you can use the Control Center Serial,...
View ArticleClik here to view.
How Do I Send Data to the I2C Master Device when the Aardvark I2C/SPI Host...
We just bought our first Aardvark I2C/SPI Host Adapter and have a couple of questions. We’re trying to send data to a Master I2C device. The Aardvark adapter has to be the Slave device because the...
View ArticleClik here to view.
I Am Working with SPI Flash Devices of Various Signal Levels and Power Setups...
Question from the Customer: I would like to use the Total Phase Promira Serial Platform to control two GPIO pins and program a 1.8V SPI flash device. I have some questions about the output voltage and...
View ArticleClik here to view.
How Do I Successfully Connect the Beagle USB 5000 v2 SuperSpeed Protocol...
Question from the Customer: I read the article Monitoring an embedded USB with a Beagle USB Protocol Analyzer and it looks like what I need to start my project. I’ll be using the Beagle USB 5000 v2...
View ArticleClik here to view.
Use the Flash Center Software’s User-Extensible Parts Library with Total...
Question from the Customer: We have been using the Aardvark I2C/SPI Host Adapter together with the Flash Center Software and have successfully programmed the AT45DB011E SPI Flash memory chip many...
View ArticleClik here to view.
Mr. Bean, the Electrical Engineer?
Rowan Atkinson, 61, has had a lengthy, illustrious career in the world of comedy across various mediums. He is an actor, screenwriter, and comedian who garnered recognition as one of the 50 funniest...
View ArticleClik here to view.
Using a Protocol Analyzer, How Do I Capture and Compare I2C Interface Data...
Question from the Customer: We will be using the Beagle I2C/SPI Protocol Analyzer to test and evaluate our I2C interface. We’re running the evaluation in two very different environments. What I want to...
View ArticleClik here to view.
Which Total Phase Tool Can Function as an SPI Slave and Receive Data Packages...
Question from the Customer: I am using the Aardvark I2C/SPI Host Adapter in SPI slave mode, using MATLAB to interface with the Aardvark adapter. The SPI master outputs a packet that is longer than 8...
View Article
