Clik here to view.
Support Question of the Week: Using the Aardvark I2C/SPI Host Adapter, How...
I have multiple AardvarkTM I2C/SPI Host Adapters and I plan to use them for a production flow; programming SPI EEPROMs (Microchip 93AA56AT-I/OT). It looks like this device is not supported by Flash...
View ArticleClik here to view.
Support Question of the Week: To Save Board Space and Not Include a Connector...
I am working on a new design that will be installed in a system. To do so, I need to save board space. My target USB bus is inside of an embedded system. To analyze and verify the results, I'll need to...
View ArticleClik here to view.
Support Question of the Week: How do I Control the SPI Slave Responses from...
I am using the Aardvark I2C/SPI Host Adapter in the SPI Slave mode. How can I specify multiple responses for the Aardvark to return, such that each packet returns a different response? To provide some...
View ArticleClik here to view.
Support Question of the Week: How Do I Clear the Saturated Buffer When Using...
I am using a Komodo CAN Duo Interface with the LabVIEW software and Komodo LabView Drivers (VI). I write a packet, and when I read the bus, the packet I am looking for has already been sent by the...
View ArticleClik here to view.
Support Question of the Week: With a USB Protocol Analyzer, What is the...
I need to capture USB 2.0 bus data between a scanner and computer. The information is scanned from a coupon, and then OCR (optical character recognition) is applied to identify the information on that...
View ArticleClik here to view.
Support Question of the Week: How Can I Use the Cheetah SPI Host Adapters to...
I have two different SPI devices and I need to transmit two different command settings. Because of the separate SS (slave select) signal pins, it looks like the Cheetah host adapter should work with...
View ArticleClik here to view.
Support Question of the Week: How Do I Communicate to the Komodo CAN Duo...
I am trying to communicate to the Komodo CAN Duo Interface device using the Keysight VEE software - a graphical IDE that is similar to National Instrument's LabVIEW. VEE cannot import in "enum" types....
View ArticleClik here to view.
Support Question of the Week: How do I Configure the Cheetah SPI Host Adapter...
I plan to use the Cheetah SPI Host Adapter for a half-duplex 3-wire SPI slave device. Can the Cheetah adapter be configured to interface with a 3-wire SPI? Is there anything special I would need to do?...
View ArticleClik here to view.
Support Question of the Week: How Can I Use a Single SPI Host Adapter to...
I have two different SPI devices and I need to transmit two different command settings. Because of the separate SS (slave select) signal pins, it looks like a Cheetah host adapter should work with...
View ArticleClik here to view.
Support Question of the Week: How Can I Make Third Party Open Source Software...
I am developing an interface for a planter that is connected to a tractor with a display monitor via CAN bus. For the agricultural industry, I found an open source program (ISOAgLib) that could work...
View ArticleClik here to view.
Support Question of the Week: Did You Know You Can Batch Program I2C Memory...
You can batch program devices using the Aardvark I2C/SPI Host Adapter and any of the following applications: the Control Center Software, the Flash Center Software or the Aardvark Software API....
View ArticleClik here to view.
Support Question of the Week: How Do I Configure Conditions for a USB...
I plan to run a design verification tests (DVT) for long periods. For part of the DVT, I'll need to continue running the test and capture data as errors occur. For another part of the DVT, I'll need to...
View ArticleClik here to view.
Support Question of the Week: For Long-Term Data Captures with the Beagle...
We are using the Beagle USB 480 Protocol Analyzer for bus diagnostics. It seems that the Data Center Software used with the Beagle analyzer has limited memory space, which is determined by the...
View ArticleClik here to view.
Support Question of the Week: Why Does My Aardvark I2C/SPI Host Adapter Send...
I am using an Aardvark I2C/SPI Host Adapter as an I2C slave and another device as a master. I am using 7-bit addressing. After every write command to the Aardvark I2C slave device, the master device...
View ArticleClik here to view.
Support Question of the Week: How Can I Create a Custom LabVIEW Application...
To test and evaluate SPI devices, I have been using the Aardvark I2C/SPI Host Adapter and the Control Center Software. For my next project, I need to use LabVIEW and I'll need a special application....
View ArticleClik here to view.
Support Question of the Week: Is the Aardvark I2C/SPI Host Adapter or the...
We are trying to do consecutive SPI accesses as quickly as possible and minimize the time between SS going from inactive to active again. We’re looking at the specifications of both the Aardvark...
View ArticleClik here to view.
Using the Cheetah SPI Host Adapter, How Can I Program two Separate SPI Flash...
Question from Customer I am working on a project and we are looking into using the Cheetah SPI Host Adapter to program SPI flash devices. Our setup will have two separate flash chips, which will be...
View ArticleClik here to view.
Want to take your I2C/SPI development, emulation and debugging to the next...
As the number of embedded applications grow and as their requirements increase in speed and complexity, the need for a more powerful and flexible embedded systems tool has become significantly more...
View ArticleClik here to view.
How Can I use a Host Adapter or a Protocol Analyzer to Continuously Read-Back...
Question from the Customer: We are testing an I2C device. To record the points in time when values change, we are looking for a way to continuously read back a register, which we have not accomplished...
View ArticleClik here to view.
What are the Options to Send I2C Data at 1 MHz?
I'm using the Aardvark I2C/SPI Host Adapter as an I2C master with the Aardvark Software API. Using C and LabVIEW drivers, I have seen the 1ms delay between separate executions as stated in section...
View Article